Cross-Pin Fixing Inserts
Internally threaded fixing inserts with a transverse pin projecting from both sides. Define the pin location, projection and joining requirements by drawing.
View product →
Swipe to explore the product views.
Round-Foot Concrete Ferrules
Round-foot ferrule forms with a visible internal thread. Define the thread system, body proportions and base details before selecting the final component.
- Cylindrical insert form with an enlarged circular foot.
- Thread designation and usable engagement are specified separately.
- Outer surface or covering construction is confirmed before a final specification is issued.
Share your drawing, material specification and quantity.
Defined by the details.
Round-foot concrete ferrules combine a threaded cylindrical body with an enlarged circular base. For a defined connection interface, the thread system and the body-to-foot geometry need to be specified together. This product entry focuses on those interface requirements and the scope of the component inquiry.
Make the thread system explicit
A project inquiry should identify the required thread designation, pitch, tolerance and effective engagement length. If a metric thread is required, state its complete designation on the drawing. A threaded opening in a photograph does not establish its standard or compatibility with the intended mating fastener.
Also specify whether the order covers the ferrule alone or includes positioning and thread-protection accessories. Accessory compatibility must be reviewed against the actual component, not assumed from a similar-looking supplier catalog illustration.
Describe the actual foot and body
The round foot, the shoulder at the base and the local external features should be dimensioned. Any requested outer covering or surface treatment needs its own specification and manufacturing review. Surface appearance should be kept separate from the required substrate material.
If the connection drawing calls for a cross-hole, show its diameter and position explicitly. If a particular forming method is required, state it in the inquiry. A geometry description alone does not establish the forming route or the component's performance in the concrete connection.
Information for a quotation
Tolerances, order quantity and lead time are assessed for the project.
Send your drawing →- Required thread standard, size, pitch, tolerance and engagement length.
- Body diameter and length, foot diameter and foot thickness.
- Material specification and any required outer covering or finish details.
- Mating component and accessory requirements, quantity and acceptance documentation.
Buyer questions
Is every pictured ferrule metric-threaded?
The photographs do not establish the thread standard. State the required designation for review; the final component specification must identify it explicitly.
Is the white exterior a protective coating?
Its construction has not been confirmed. Do not specify a coating or sleeve based on colour alone; provide the required material or finish details.
Does this version have a cross-hole?
A cross-hole is not visible in the supplied product images. If one is required, show its position and dimensions on the drawing for review.
Have a part in mind?
Share your drawing and requirements. Let’s discuss the manufacturing route.
Related Products
Compare other component forms for your drawing requirements.
Square Head T Bolts
Externally threaded fasteners with a square flat head. Define the head footprint, thread and shank dimensions to suit the specified mating assembly.
View product →
Flat End Threaded Sockets
Threaded socket forms with a flattened end and transverse hole. Define the hole position, flat-section dimensions and internal thread for your project.
View product →